My pie carrier prototype

Sometimes things unplanned happen, and just have to be acted upon. I mean, I never knew I needed let alone wanted a patchwork pie carrier, but when things collide at just the right time you just have to go with it.

Let me explain.

Scrolling Instagram a post from @suzyquilts for a quilted pie carrier caught my eye, I looked a little closer before thinking that I’d quite like one, and then how hard can it be. Which as we know is dangerous.

So I dived into my stash and emerged with a gloriousness of pink, butterflies and fruit.

And at around the same time my love for flying geese was reawakened with the Cloud Nine block by Debbie Maddie in the Moda Blockhead emails which I’m subscribed to and rarely act upon. I was smitten, and realised I could combine my new yearning for a pie carrier with this Moda block, and then I really would be on cloud nine.

Assembling the block

Well this was the easy part as I had instructions (yes, I still hadn’t bought the pie carrier pattern), and after a morning sewing group session I was well on the way to finishing the Cloud Nine block.

It’s busy, but I thought that will hide any spills when it gets used - practical and honest! And mostly I’m happy with it - if I were to use these fabrics again I think I’d make some changes to the flying geese (outer row) block on the top left - there’s not quite enough contrast between the two fabrics I’ve used. But I decided to live it with and carry on - it’s only a pie carrier after all.

I also knew I’d need to add some borders to my square to give it a chance of being big enough, and it’s at this point that the patterns all went a bit crazy, but I was ok with that, as I said it’s a pie carrier and honestly it will get some use, but only occasionally.

I followed loosely Madam Sew’s pie carrier tutorial , adapting things such as the corner handle length, and decided to pin it together to see how it might work.

Phew. It was looking as if it might work…

I also decided to ‘bag’ my square rather than sew the wadding to either the top or bottom fabric, and I’d remembered to add in and secure the corner loops before I connected the top, wadding and backing layers.

I even remembered there were pins in evidence when I turned it through, which was something.

And it still looked like it might work (the longer ‘handle’ strap is still pinned on in this photo).

Adding some detail

With my newfound Bernina BSR skills and keen to practice them at home relatively soon after my training day I decided to add some machine stitched detail to the central butterfly. Tracing the outline of the wings, body and markings freehand.

It’s easier to see where I went on the backing side - and I’m pleased with that, especially given it was the first time I tried it on my machine for real.

That only left the longer handle to attach, and with plenty of securing stitches that’s just what I did.

And it works, just. I’d forgotten to allow enough for a seam allowance so any pie in an 8 inch tin will get a bit of an airing. But carry pies it does - or rather it has already successfully carried a flourless chocolate cake. I think though this one will be better size for my small quiche dish, but that really doesn’t get taken out much!

So this one is really to test the process, and to have a bit of fun - but I’m planning to make another, larger and more practical one just as soon as I can decide what fabrics to use, or rather where to place the fabrics I’ve chosen.

Watch this space, and if you’re lucky I might even bring a pie (or something alternatively sweet) with my non-prototype pie carrier!

New shelves, and ensuing chaos!

I lightheartedly dubbed 2024 the year of the shelves, and while we did get quite a few shelves up then this year has seen us tackle almost as many shelves (though I’ve not actually counted). My craft room cupboard was always on the list to have some relatively narrow shelves across the alcove to make use of the space - and I commissioned MOH to make three shelves from the large shelf that came out of our built in wardrobes (more on those another day I’m sure).

He duly and promptly made two and a half of those shelves, which sat mostly undisturbed under our stairs. But this is where it all went wrong, while I was waiting for the actual installation (and I’ve been pretty patient even if I do say so myself) I decided I needed a fourth shelf.

I think by this time MOH was very much of the opinion that he should get these four shelves on the wall PDQ in case the four grew to five, and so on.

So when I spotted this in my craft room, I knew we were in business…

Bring on the shelves

Like anything once you start and get the first piece up, it flies by - and thankfully that was the case here even after a small hiccup when the pipe/wire detector decided it needed a new battery and we actually had a spare so work could continue, phew.

Somewhere along the way one of the shorter supports went missing, or was never cut, or whatever - but now that we’ve spent some time sorting out the garage so there’s actually space to move, MOH was able to quickly cut a new/replacement one - it’s purposefully on the inside of the cupboard, but one day it’ll get painted I’m sure.

Load them up

And aren’t they great?

They are only about 70cm wide by less than 20cm deep - though you’ll not be surprised to learn that MOH was provided with more detailed measurements than this! - but have really made a difference to my craft room. For comparison they offer a similar amount of space as four extra cubbyholes in my Kallax units, which is a lot of new space, but the space is linear so its easier to store and access smaller items.

The only issue was that as I moved things around, and onto the new shelves I realised that the spaces I now had in the Kallax cubbyholes should more usefully be filled with things I use more often. So these four shelves prompted an almost entire room reorganisation, which meant that for a day or two the room mostly looked like this.

But it has got better, and I can even see the carpet again!

I even found things that I had forgotten about, and things I didn’t even know I had - like a small bag of felt squares, which was handy as I’ve seen a small stand-up Christmas tree which uses felt which I want to try and make, so that’s a result.

My four new shelves are fully loaded now, and everything has its place - it’s so nice to have everything, such as my threads and patterns, together. But don’t tell MOH as I’m already lining up a couple more shelf installations around the house, he doesn’t need to know about these just yet, and I promise I’ll break the news to him gently!

Repurposing old clothes as pouches

You know I like a pouch or two, and you’ve probably worked out that I don’t really like to throw things away if they still have another use in them. Today I’m sharing a couple of recent makes which combines both of those, and I’m very happy with the outcomes, and hopefully you’ll be persuaded to try projects with clothes you have loved too.

T-shirt to project bag

I really loved this Joules t-shirt and was happy to rediscover it in my wardrobe this summer, but really it was long past its best to wear - even for gardening, and so it was retired briefly. But I kept seeing it in the corner of my craft room, and I knew that if I didn’t cut it up soon then it might very well make its way back into my wardrobe.

So I had a look through the rest of my scraps, and in particular the old clothes that I’d already cut up before we moved and found the remnants of an old brightly coloured Phase 8 tunic which made the perfect pairing. Once again I loosely followed the instructions for the vinyl fronted pouches, but without the vinyl front and supersized.

I wanted to keep the embroidered Joules logo, and so cut the front of my new project bag from the back of the t-shirt. As I was sewing I realised that I also wanted to see snippets of the fabric I’d chosen for the lining, which if I’m honest looks better as this pouch rather than with the brown trousers I regularly used to pair it with for the office!

That meant I needed to add a strip of the lining fabric to the back section of the project bag to be, so that when I turned the surplus fabric over to encapsulate the rough edges it would be on display. Mission accomplished, and a few decorative splashes of zigzag additions to bolster some of the seams and I was done.

I told you the lining was bright, didn’t I? I’ve immediately put this project bag to use and its currently storing a selection of fabrics for a future make I’m contemplating - in fact it came with me to my patchwork group like this, and after lots of playing around testing out the placements of fabric it came home looking pretty much the same, but with the added ideas and advice from more experienced quilters than me.

I’ve a feeling this will be a small make for the new year unless I have a burst of inspiration, time and inclination!

Geometrical yo-yo storage

The second pouch is one that I’ve made this week to solve a specific problem (not really a problem, but it’s definitely solved). The material I’ve used was once a vest top, and unusually for me is more coordinating than contrasting, well on the outside anyway.

I wasn’t sure how this fabric would sew as it’s quite stretchy, so instead of using another t-shirt I had in mind I opted for this contrasting batik fabric which I’m sure I bought back at one of the larger shows I went to in London and was well due a sewing outing.

The problem it needed to solve was to provide a home for my giant yo-yo maker (well it’s the biggest one I have), which as you can see was struggling to fit into one of the pouches from the recent batch I’d made.

And it does - phew. The maths had me doubting myself at one or more points, but my reasoning for adjusting the original pattern instructions worked out ok.

I even added some of the rolled hem detailing to the bottom of the pouch as a reminder of its previous purpose. And I smiled to myself as I put the completed pouch back in its new home, wondering if my choices has been influenced at all by the wicker basket this time round…

But what’s even better is that I’ve still some of this fabric left, and I have the trimmings which are now very happily wound together and sitting in my waste weaving pile, no doubt they’ll show up in another project one day!