My Christmas (and now my Winter) wreath

I’m getting into this wreath making - and even though I made my latest wreath at the start of December as a Christmas wreath, I’m not ready to let it go yet so it’s be renamed my Winter wreath! I think that’s ok, don’t you?

For this workshop I headed over to a village outside Grantham meeting up my SIL for us each to make a wreath for our front doors (or in my case, as before, my back door!). I hadn’t realised the workshop was to be hosted in a private house and so struggled to find where I was supposed to be. Luckily though I stumbled upon a villager who was also attending and helped me, I’m so glad she did as it was a brilliant evening hosted by Chloe Jonason, along with expert wreath advice from Sarah at Sage and Satin Floral, who we discovered during the course of the evening lives in the same village as my SIL. A small world indeed.

But anyway, wreath making - entering into a room set up for the workshop with a large table in the middle and wreaths complete with moss laid out ready for easily 15 of us, with a huge pile of greenery in the centre of the table made quite an impact. The lebkuchen and mulled wine on arrival, and throughout the evening were also very much welcomed, though with a drive ahead of me in inclement weather the lebkuchen were very much more my thing!

My wreath after adding greenery, some ivy flowers and a few red berries - secateurs at rest in the middle of the wreath

HOW IT STARTED…

My completed wreath complete with decorations - including a large silver bow, golden lotus flowers, cinnamon sticks and dried citrus fruit

HOW IT ENDED…

Compared to my autumn wreath, this one has more decorations on which feels right for a more Christmassy effort - and it was good to learn how to wire these and attach them to the wreath. I’ve had one casualty - a cinnamon stick on our doorstep - which I’m quite impressed with, and used a very similar technique on my repurposed autumn wreath. Which reminds me I need to retrieve those pine cones and dry those before someone thoughtfully adds them to our brown bin…

Learning from my previous workshop, this time I had prepared my boot for the wreath’s journey home with a large piece of plastic and instead of moving it into the garage overnight, I left it in the boot! It was fine. In fact I didn’t hang it on my back door the next day either as I needed to make plans for storing the autumn wreath, and it was still fine. It’s still going strong and we’ve definitely had some weather in the last month or so, so I’ve also learnt that wreaths are pretty resilient.

It was only when I hung it on the door though, that I realised that my golden lotus flowers could have signified the Five Gold Rings from the 12 Days of Christmas, if only I’d thought to add another at the bottom. Never mind, it’s something to bear in mind for a future wreath, and as you’d expect I plan to remove the decorations, dry and store them for future use.

But in the meantime, enjoy a few more pictures of my newly renamed Winter wreath - I’ll let you know how long it hangs around for, and if there’s a replacement (though I’m pretty sure there will be one!)

A full length shot of the completed wreath on our dark grey door - which really sets off the silver bow
A closer look at the golden lotus flowers, along with yew and ivy greenery, some ivy flowers and red hawthorn berries
A closer look at the bow at the top of the wreath, the silver ribbon has wire in the edges and some transparency, the tails are long (to the bottom of the wreath) but aren't included in the photo

Wreath making is definitely a skill I’m pleased I’ve added to my repertoire, and I’m pretty sure I’ll be scouring my garden for plants to use in future wreaths, as well as looking for places locally to forage materials, as my garden is unlikely to keep up with my new wreath habit for a little while yet!

Repurposing my autumn wreath

17 October I went to a workshop to make my autumn wreath, and almost a month and a half later it was still looking pretty respectable, if not slightly weather worn, which given the weather we’ve had - rain, wind and snow - isn’t surprising! And with a new workshop, and wreath, booked in for the start of December its days were numbered.

My autumn wreath fading a little on our open door

And while the autumn wreath was fading, it wasn’t completely done - which was just as well as I had plans for it.

Back in 2016 I shared how I’d bleached some pine cones, and how my top tip was to start early - I think I took my own advice there as I’d not used them properly, so by my reckoning eight years is plenty early enough!!

This year was going to be their year

At least I hoped it was.

I brought in the autumn wreath as by now the weather was too chilly to do this outside, and was immediately grateful that I thought to put this on a towel and on paper. It was wet from the recent rain, which was no bad thing as keeping the moss wet helps. The towel soaked some of that up, and the white paper helped easily identify bugs crawling out of it.

The autumn wreath on my kitchen worktop, plus towel and paper, before trimming the most faded elements.

I snipped off the Chinese Lanterns and some of the more faded greenery and the berries which were past their best, but left as much as I could.

To check the viability of this primping project, I placed my bleached pine cones around the wreath to check I had enough to fill the gaps. I did. So with more optimism than skill I set about wiring them into place. I had thin wire so I think this was harder to use than the thicker short lengths of florist wire which could be more easily pushed through the moss, but I go there and all the pine cones were attached successfully.

It doesn’t look too bad laying down does it?

I knew the proof of the pudding, or at least my newly acquired wreath making skills, would come when I held it vertical - and thankfully none fell off, so I could move to the next phase of the project - putting it on display.

The primped autumn wreath with newly acquired pine cones attached to our gate

Not taking any chances with the wind gusts, I’ve tied this on in four places - top, bottom and both sides - and it’s stayed on the gate, so far. What’s more, the pine cones have also stayed attached to the wreath, so I’m calling that a win - and a pretty and sustainable one at that.

Though this will be its last stand, with the majority of it heading to the compost bin (actually our brown bin as we haven’t sorted new compost bins yet) in the New Year. I’ll be saving the pine cones, and if I can the metal ring, but you’re not surprised by that are you?

This is likely to be my last post before Christmas, so thank you again for continuing to read and support my blog. I hope you have a great time over Christmas celebrating and/or spending time with families or loved ones, and doing what’s important to you.

We’re looking forward to spending the Christmas period with family in our new home. I hope to share a post of my Christmas wreath before the New Year, so I’ll save wishing you a Happy New Year until then.

Fusing some Christmas trees

I seem to have a thing for Christmas trees for my handmade cards. I’m not sure why, but at least I’m consistent! This year my cards were totally inspired by The Sweet Stitches - do go and check out some of her reels on Instagram, they’re amazing.

I’m pleased with how my cards turned out, and while I started much earlier than normal as I was keen to get my cards posted as they were doubling up as change of address cards from our house move in the summer, I seem to be sharing them here much later!

Yes, with postage costs what they are I have no shame about doubling these up, even though they’re about half a year apart. As it was MOH’s eyebrows were raised when the post office teller gave the amount for twenty four second class stamps, which wasn’t too bad as we’d managed to hand deliver many of our change of address cards to friends on our recent London trip.

But anyway, back to the cards…

Four christmas tree shaped templates with scissors alongside them on the small white round table, the tree templates are on a blue circular coaster

I started with some templates, four for good measure. I think that’s why I keep coming back to trees, their shape is pleasing and like nature, there’s room for some variation each time, I’m not one for being rigorously contained - and that goes for trees too it seems!

I had scraps of fusible interfacing as well as plenty of scraps of material. I kept my palette pretty simple - reds and greens, and the snowflakes on my red Christmassy fabric was a bonus.

On the scraps of single sided fusible interfacing I drew on some Christmas tree shapes - for my test I tried different pens ranging from a Sharpie, to a regular biro to a pencil, and all worked perfectly fine. I mostly continued to use the biro as it was easier to use and was easily visible from the other side.

The fusible interfacing side up with the tree shapes drawn on, on my crafting mat
The reverse - and patterned side - of the image above, small snips of reds greens and snowflake material

I ironed on small scraps of fabric which I’d cut into random shapes. These were quite small, and that was on purpose as my templates were pretty small too. The trick here is not to overlay the fabrics too much (as they won’t stick) and not to get too stuck on (pun intended - sorry) covering every part, though seeing where fabric covered the template was useful.

The four colourful and multi coloured trees cut out - and a pile of trimmings alongside them on the craft mat

Cutting them out was more enjoyable than you might think. Seeing that pile of trimmings grow and the trees take shape was satisfying, and I was keen to check the size on my card blanks.

A single tree laid onto a brown craft card - trying for size!

It was simple, but it worked for me.

So the tree production started.

Every one different. Every one unique.

tree production - two rows of five trees and a row of four below on my craft room desk

If you looked at my Instagram inspiration then you’ll notice a very obvious difference. Mine don’t have the top stitching, well one does - I tried it and my shapes were too small and too intricate for my machine. So I need to work on that, or at least work out if free motion embroidery is an option for my machine!

Instead I added little diamante studs to the end of each branch and a star on top, which worked a treat.

Now I’d love to show you an image of a final card, but somehow in my keenness to get them to their recipients I don’t have one - not sure how I managed that, but take my word for it the sparkles definitely finished them perfectly.

I’ll be trying more of this technique next year I’m sure - my learning is to try bigger shapes and bigger scraps, and hopefully I’ll be better at photographing the end result!