A tray transformed!

As soon as I'd finished my first Pinty Plus project I was on the look out for what to spray next. I racked my brains, looked around the house and in fact anything that stood still for long enough was a contender, then bing! my next project emerged. 

Yes, the time was up for this perfectly functional but slightly dated metal tray. It's something I'd had from new and it used to get a lot of use, but rarely does these days. The cat on the right looks very much like my Dylan did and while I didn't think he'd appreciate being covered up, I knew it was time for something new.  He's been gone over ten years, so I think I'm allowed.

So I set to work. The tray was given a thorough clean before I started. I decided against straightening the bashed up corner (bottom left) as while I've no idea how it happened now, it seemed part of the tray's history.

I also knew that I wanted to try something different for this project and planned to add a flower shape to the design.  My silicone lids proved to be the perfect template.

With my plan established I started to spray. 

I wanted a blue flower on a yellow tray and started spraying the front of the tray in the same light turquoise that I used on the inside of my sewing box.  I did feel a bit guilty spraying the cats and I'm sure they were giving me a stern look as I did.

With the blue base layer completed and drying I started to make my template. I'd considered using a stencil approach but decided against it as I wanted the centre of the flower yellow too, without any connecting lines. 

Taking the silicone lid I placed it on a thick piece of card - an insert I'd saved from some bedding I'd bought, which I knew would come in handy one day. Today was its day!

I drew around the shape and discovered that a roll of washi tape was a similar size as the centre so used that to make my middle.

Using a craft knife I carefully cut it out, without cutting myself at all (phew) - and as it was a nice day the garden table became my workspace.

Before I could use my template though I wanted to spray the back of the tray. It was a bit scratched and well tatty, and it gave me the chance to see the colour of the new spray Mostaza.

I'd been hoping for a mustard yellow - and while I like the colour it is - it's paler than I thought it would be.  I've been on a quest since we bought our mustard dining chairs (just two - I will show them to you soon) to add more yellow to our house, and this yellow works equally as well.

So having tried the yellow, I was keen to spray my design.  Another reason for choosing to block out the blue in this way was that I thought it would leave a cleaner line.

And it turned out well.  But I thought it needed more.  Don't you agree?

So out came my fine line black pen and I drew freehand around the petals, and added some texture to the middle.  The lines aren't perfect - and that's ok - but don't they make a difference?

Now pleased with the depth and detail added with a simple black pen I wanted to seal the tray. For this I used the Pinty Plus Matt Varnish, which was equally easy to use. And I think it has deepened the colours a little.  

As my tray is likely to be in use much more often now I think it was important to varnish it. I didn't use this on the sewing stool because when I'd completed it I didn't think it needed it.  

So there you have it, a tray transformed! 

What do you think?

The Pinty Plus Chalk Spray Paint is available from the Novasol Spray website, each 400ml can of Chalk Paint Spray and Matt Varnish costs £11.50.

This is a collaborative post with Novasol Spray who provided me with the materials for this project, but all words and opinions are my own.

A new tote bag with Adam Ross fabrics

* This is a collaborative post with Adam Ross Fabrics, who provided the material for this bag, but all opinions are my own.

Remember this brightly coloured fabric from Adam Ross Fabrics? Well, guess what - I've made myself a bag and I'm rather pleased with it. MOH's reaction was "another bag?" but deep down I think he was impressed too.

Adam Ross Fabrics are a new fabric retailer based in Birmingham who are "looking to bring quality back to the British clothing industry". And they believe you shouldn't have to compromise on the quality of the fabric you use.  There's fabrics for fashion and interior design on their site and unsurprisingly they sell to both of these customers.

I've not ordered fabric before online, so I was keen to see how it would work out.  On the website you can shop by material type so if you're after a velvet or a chiffon then head straight to those sections; you can also shop by colour which was great for me as once I'd found my bold flower material I was after a zingy plain to go with it, and doesn't the lime green go well?

If you're not sure what material type you want then there's a helpful description in each section to help you identify what you need.

My fabric - which was quick to arrive was just as I expected it to be and I immediately loved the colours.  I'd planned to make a tote bag, and I'd pinned this two-tone fabric tote bag by Make It & Love It ages ago - so it was the ideal time to be one of those pinners who acted on their pins, and make this bag.

Making the tote bag

Following the instructions on Ashley's blog I joined the two fabrics which form the outer part of the bag.

And I couldn't help but sneak a look at what they would look like together.

Then it was time to pin the ribbon in place before sewing it top and bottom.

Next it was joining those two pieces together, to actually start to form the bag.

Then came the bit that I was less sure of. It's purpose was to square off the bottom enabling the bag to stand up on its own when packed, and to make it easier to pack too.  I almost left this bit out, but then I figured it out and it was back in again.  So I wiggled the seams together and measured before sewing a line perpendicular to the seams.  It sounded wrong, but it worked!

I repeated all of the above with the lining fabric and hurriedly read on to see what was next.

Handles, that's what. I'd forgotten how dull turning out a tube can be, but a bag needs handles so it had to be done.  With them the right way round and pressed, they were attached to the bag.

The lining and outer fabrics were joined together leaving an inch hole. The next step was one of those "I'm not sure that's going to work" moments, as the instructions said to turn the bag inside out by pulling the outside from the in, through this little hole.

But of course it worked and soon I was adding a round of top stitching close to the edge of the bag, and adding some support rectangles to the handles.

With my sewing now looking like an actual bag - I stopped for a minor celebration!  

I didn't mention before, that although I can sew I'm not a confident sewer so when I sew something that looks like it's supposed too then I'm amazed!  Especially with this bag as for once I was following a pattern, not like when I decided to tackle some round seat covers with piping for the garden chairs, hey?!

So the only thing left to do was to add a bow. So once more I was rummaging through my ribbon stores and when I found this black grosgrain ribbon with a cream trim to it I just knew it was the one to finish my bag.  And doesn't it?

So now I have a new bag. One that I'm pleased with and very tempted to sneak into my panniers when we head off to France, because well even a cycling girl's gotta look chic in France haven't they?

* This is a collaborative post with Adam Ross Fabrics, who provided the material for this bag, but all opinions are my own.

Pepping up some patio pots

I noticed that my Spring pots had sprung and were all but done when I started to tackle the garden last weekend. And I resolved to change that and get some bedding plants for the patio. I asked MOH what colour plants he fancied this year - I wasn't quite expecting the look of confusion though. When pressed he chose orange, because as he later said, he thought it'd be hard. 

It wasn't actually. So orange and white we have. 

At the garden centre one lunchtime I picked up some Gazanias, Bellis, Tagetes and Allysum and left them in the boot of my car for the afternoon... Ahem. At home later they soon recovered, it's amazing what a drink of water can do. 

I have five patio pots which stand along the edge of the patio - somehow odd numbers work best here - but when I bought the plants I hadn't worked out how I would split the twelve of each variety equally between the pots. I was pretty sure though that six trays would be ample.  

I still didn't know how I was going to split them as I started planting, so I broke the plants away from those terrible polystyrene cases and laid them in the pots: two of the Alyssum, Gazanias and Bellis for each pot and one of the Tagetes. 

It's not symmetrical, but it seems to work. Pleased with avoiding a complicated maths lesson I rewarded myself with some faffing about on my phone.  

And there you have it, some pepped up pots for our patio. And some that conform to the request, however tongue-in-cheek it was made. But why, oh why do I find myself covered in compost whenever I plant up pots?

Please say it's not just me!